Table of Contents
A Principal Designer is the designer a client appoints, in writing, to plan, manage, monitor and coordinate health and safety in the pre-construction phase of a project. The role comes from the Construction (Design and Management) Regulations 2015 (CDM 2015) and is required on any project with more than one contractor. The Principal Designer leads on design risk, pre-construction information and the health and safety file. It is one of the main duty holder roles under CDM 2015, alongside the client and the Principal Contractor. If you want support with these duties on a commercial, retail or EV and energy project, see our CDM Services.
What does a Principal Designer do under CDM 2015?

The Principal Designer’s duties are set out in regulations 11 and 12 of CDM 2015. In short, they must:
- Plan, manage and monitor the pre-construction phase, and coordinate health and safety matters during it, so that the project can be carried out without risks to health or safety, so far as is reasonably practicable.
- Identify and eliminate foreseeable risks, or control them where they cannot be eliminated. This covers the people building the project and those who will later maintain, clean, use or demolish it.
- Make sure every designer meets their own duties under regulation 9, which include eliminating risk through design and providing enough design information for others.
- Make sure everyone in the pre-construction phase cooperates with the client, the Principal Designer and each other.
- Help the client provide pre-construction information, and pass it promptly to every designer and contractor appointed or being considered.
- Liaise with the Principal Contractor for as long as the appointment lasts, sharing what they need to plan and manage the construction phase.
- Prepare the health and safety file, then review and update it as the project develops.
The pre-construction phase covers all design and preparation work, and it can carry on after building work has started. So the Principal Designer’s role does not stop on the first day on site. For an overview of how all the duty holders fit together, read our article CDM duty holders: who is responsible for what under CDM 2015.
When must a Principal Designer be appointed?
A client must appoint a Principal Designer where more than one contractor is working on a project, or where it is reasonably foreseeable that more than one will be. That test applies whatever the size of the project, and whether or not it has to be notified to HSE.
Three rules apply to the appointment:
- It must be in writing. A clear written appointment avoids any doubt about who holds the role.
- It must be made as soon as practicable, and in any event before the construction phase begins.
- Earlier is better. HSE advises appointing as early as possible in the design process, if practicable at concept stage, so the Principal Designer can influence the design while changes are still cheap.
Domestic clients are treated differently. Most of their duties pass to the contractor or Principal Contractor, or to the Principal Designer by written agreement. Our article CDM Regulations 2015 explained sets out when the regulations apply.
Who can be a Principal Designer?
The Principal Designer must be a designer with control over the pre-construction phase. That can be an organisation or, on smaller projects, an individual. Under CDM 2015, “designer” is a wide term: it includes anyone who prepares or modifies a design, or arranges for others to do so, not only architects.
Under regulation 8, the Principal Designer must have the skills, knowledge and experience to carry out the role, and, if it is an organisation, the organisational capability. The client must take reasonable steps to satisfy itself that this is the case before making the appointment.
In practice, the role is often held by the lead designer, a specialist health and safety consultant or a project manager with design responsibility. What matters is control over the pre-construction phase and the ability to do the job properly.
What happens if the client does not appoint a Principal Designer?
If a commercial client fails to appoint a Principal Designer, the client must carry out the Principal Designer’s duties itself. Few clients are set up to do that, so leaving the role unfilled moves the legal risk back onto the client.
On a domestic project, the designer in control of the pre-construction phase becomes the Principal Designer by default.
How does the Principal Designer work with the Principal Contractor?

The Principal Designer leads on health and safety before construction. The Principal Contractor leads during construction. The two must work together for as long as both are appointed.
In practice, the Principal Designer passes on the design information and residual risks the Principal Contractor needs for the construction phase plan. The Principal Contractor, in turn, feeds information back for the health and safety file.
If the Principal Designer’s appointment ends before the project does, they must pass the health and safety file to the Principal Contractor. HSE also expects them to brief the Principal Contractor fully on design matters that affect the remaining work. Whoever holds the file at the end hands it to the client.
Is the CDM Principal Designer the same as the Building Regulations Principal Designer?
No. They share a name, but they are two separate legal roles with different purposes.
Since 1 October 2023, building work in England that is subject to the Building Regulations has had its own duty holder regime, introduced under the Building Safety Act 2022. It includes a Building Regulations Principal Designer, whose job is to plan, manage and monitor design work so that the building, if built to that design, would comply with the Building Regulations.
| CDM Principal Designer | Building Regulations Principal Designer | |
| LAW | CDM 2015 | Building Regulations 2010, Part 2A (in force 1 October 2023) |
| WHERE IT APPLIES | Great Britain | England |
| MAIN PURPOSE | Health and safety in the pre-construction phase | Compliance of the design with the Building Regulations |
| WHEN REQUIRED | More than one contractor on the project | More than one contractor on the project |
| KEY OUTPUT | Pre-construction information and the health and safety file | A coordinated design that complies, and a signed statement at completion that the duties were met |
| IF NO ONE IS APPOINTED | The client carries out the duties | The client carries out the duties |
The same person or organisation can hold both roles, as long as they have the competence for each. The two appointments are still separate, so if you want one firm to do both, confirm that in writing. Some health and safety consultants who act as CDM Principal Designer will not have the design expertise needed for the Building Regulations role, so check before assuming one appointment covers both.
How CCM can help
On suitable projects, CCM can take on much of the Principal Designer’s work on your behalf. Where another firm holds the role, we can support you as the client: explaining your duties under CDM 2015 early, checking that appointments are in place and in writing, and keeping design and construction information flowing between the team. Find out more about our CDM Services.
Frequently asked questions
Yes, if more than one contractor will work on it. The size of the project and whether it is notifiable to HSE make no difference to the test.
No. The Principal Designer must be a designer with control over the pre-construction phase and the right skills, knowledge and experience. That can be an engineer, a lead consultant or a specialist firm as well as an architect.
Yes, if they are also a designer with control over the pre-construction phase and have the skills, knowledge, experience and organisational capability for both roles. This is common on design and build projects.
Yes. The role can pass to another designer, but there should only ever be one Principal Designer at a time, and each change should be made in writing.













